CE6SKUHD
CE6SKUHD COM Express模块，使用英特尔第6代Core™i7/i5/i3 (Skylake-ULT)低功耗处理器系列，板型尺寸为95mm x 95mm，符合PICMG COM Express R2.1 Type 6标准定义。模块能耗在15-25瓦特之间，采用表贴加SODIMM内存设计，容量可达24GB；千兆网卡，支持VGA，LVDS(或eDP)及2路DDI显示输出。CE6SKUHD模块可作为高密度计算，如加固型计算机、交通能源、机器人、工业自动化、测试/测量、医学影像、通信等应用，是嵌入式
-
产品特点
-
● COM Express Type6，通用性强，升级方便
● 一路千兆网络 ● Intel第六代酷睿低功耗系列处理器
● 3路SATA ● 表贴加SODIMM设计，高达24GB
● 5路 PCI Express,4路USB3.0 ,8路USB2.0 ● 支持Windows 7操作系统 ● 宽电源输入，以及支持单路电源输入 ● VGA/LVDS/ HDMI/DVI/DP丰富显示接口 ● 宽温设计，支持-40至85度工作温度
-
-
产品规范
描述
板型
Compliance
PICMG COM Express R2.1 Compact Form Factor
Type
Type 6, 95mm x95mm
处理器
i7-6600U
2.6~3.4 GHz /TDP- 15W/2C-4T/4M Cache
i7-6500U
2.5~3.1 GHz /TDP- 15W/2C-4T/4M Cache
i5-6300U
2.4~3.0 GHz /TDP- 15W/2C-4T/3M Cache
i3-6300U
2.3GHz /TDP- 15W/2C-4T/3M Cache
Celeron 3955U
2.0GHz /TDP- 15W/2C/2M Cache
内存
Memory Down
1 channel DDR4 Memory Down, up to 8GB
SO-DIMM
1 channel DDR4 SO-DIMM, up to 16GB
图形显示
Intel® Gen9 LP GT2 Graphics engine
LVDS: 18 bit or 24 bit single/dual channel panel with resolutions up to 1920×1200 pixels at 60 Hz
Optional eDP:4096×2304 pixels at 24Hz
VGA: resolutions up to 1920×1200 pixels at 60Hz
(Build option with DDI 2)
2 DDI（DDI2 is Build option with VGA）
DP+ DP: resolution up to 4096x2304 @ 24Hz or 3840 x 2160@60Hz
HDMI: resolution up to 4096x2160 @ 24Hz or 2560x1600 @ 60Hz
DVI: resolution up to 1920x1200 @ 60Hz音频
High Definition Audio
Support up to 3 codecs
Speaker Out
网络
Single LAN
One 10/100/1000Base-T
存储
SATA
3 SATA ports supporting both 6.0、3.0 Gbps and 1.5 Gbps operation
Supports RAID 0, 1, 5 and 10
PCI Express
PCI Express x1
Eight PCI Express x1 interface
Ports 0–3 configurable as one x4; or two x2;
or one x2 and two x1; or four x1 ports
Ports 6-7 can be configured as two x1 or one x2 ports
USB
USB 3.0
Four USB3.0 expansion ports with transfer rate up to 5Gb/s
USB 2.0
Eight USB 2.0 expansion ports I/O接口
LPC
One LPC interface, Support multi SIO
COM Port
2 Port(2-wire)
GPIO
8 GPIO
Watchdog
65536 level, 0~65535 sec SPI Bus
For BIOS only
BIOS UEFI BIOS 8M Byte ,AMI BIOS 操作系统
Microsoft Windows
Windows 7 / Windows 10
Linux
Ubuntu, Centos
Wind River VxWorks
VxWorks 电源要求
AT
Only +12V power rail, support 8.5V–20V input
ATX
+5V Standby and +12V power rail input
温度范围
Non-operating
-40 to +85°C
operating
商业级：0 to 60°C
扩展温度：-20 to 70°C
工业级：-40 to 85°C
-
资料下载
